Видео

I dont like the lump trails

Hello! I have a flat roof with a white tarp-like covering that was put over. It's stopped the leak inside the home but water still gathers in the area. Could I use any of your products to raise the roof up a tiny bit in the area while also providing an extra seal from water?

Does it come in black?

Masters

Great work, I liked the technique

What's the product? An acrylic coating like Cromapol?

Can I get this in Canada ?

Where do you get the 4foot fabric

This is Awesome!! what is the name of the fabrics that you put between coatings? :) thank you for sharing

Great video, thanks for sharing!

I think they missed the most crucial step. Since the old membrane is left ln place, that membrane should had been prepared and sealed to the drain bowl. For when their product cracks at the drain ring in about seven to ten years. Unless a maintenance program is in place.

Garbage. Just add a cap sheet. Hot. Or cold and heat weld laps.

I agree, its no use if you don't raise it to prevent pending.

How much sq footage do you get on a 5 gal gal?

That's nice work. But before proceeding to roof coating roof cracks repair is the very essential for long lasting roof waterproofing and results as well. So far our experience is only coating is not enough to hold water leakages for a long time.

Turn volume up. It's to low.

This will last about a month or two. The cap sheet is oil based and that white jizz is water based. They naturally repel each other.

Anyways torchdown would have been the best solution for that particular location.

Thanks for the informative video, awesome

What is the name of the coating?

I'm tired of seeing this ad.

There are different products on the market to fill low areas of ponding. Henry makes Pond Patch that works and there is also a product called Roofslope. You can try them and see what you prefer...

this makes a nice temporary patch

This wont get rid of the water pounding!

5:05 What is the name of that roll of fabric? Can you tell me brand name & model number of that fabric? Thanks

He’s not raising the area with ponding water. He simply applied one layer even extending it outside of the area with ponding water. It may stop the leak but not the ponding. To stop the ponding he needs to raise and level off the deeper spot with the higher one.

Excellent video!

As a contractor if you wanna be a cheap piece of shit then use this product

Hello mister what kind of material do you using? Do you have the name all materials? I like how you guys stop likings

Title ? Error, nothing here on ponding

What's the problem here? And why wouldn't you just find the hole and patch it with a small piece of torchon? AND I'm pretty sure that the substrate should be 100% dry with that product. Soooo unprofessional. WHAT the ... are you fixing?? Dirt on a roof?

What’s substrate?

What's the warranty on this ? Also, will insurance companies then treat this as a "new" roof ?

Not a fan of elastomerics but for some roofs that don't really need to extend their service life i guess it is an OK fix. Our roofing company has used pretty much everything out there over the last 25 years. We use only one products after 8 years of success and not callbacks. There is a Liquid butyl rubber made by epdmcoatings. What we like about it is that it does not need a primer for any of the roof types we have applied it over that goes for metal, BUR, epdm, foam but NOT silicone. also it is a one coat application so we close much more business with this product because we come in as the lowest bid! It is a solvent product so primarily the reason it last all the years. Cheers

If this product is placed on a sloping roof is fabric mesh required? I guess if the roof is more horizontal then the fabric mesh will prolong the life of the product. Also can the fabric mesh interfere with vapor permeability?

Does this come in different colors?

Unfortunately, in my experience, it is very rare to see a proper solution applied. Flat roofs seem to be prohibitively expensive to service and in my area it is absolutely the contractors inflating the pricing making it almost no choice for building owners to opt for an actual permanent solution.

That repair ain't got last long. Yall forgot to add primer before the coating and second of all yall coat it will it was still humid wet.. So its not gonna cure probability...

😁👍👏🏻

Would have been helpful to put links to the type or brand of fabric he's using.

I recomend to Always Use Base Primer, and Embed the Polyester in between layers with Base Primer, Dries Quicker and then Apply The Coating.... I LEARNED to ONLY Use Silicone VS Acrilic Base...on any Restoration! Good Luck People!

What if you have a void what can I do?

C'mon we wanted to see you build up positive slope with a leveling material... then coat it with elastomeric

Love that tool

Hi are you applying a fiber glass mesh on top of an existing torch applied membrane roof deck? What are you applying? Is this polyurethane?🤔

That roof failure is not the fault of the system, it is the fault of the installer. Chopped fiberglass emulsion roofing should be a minimum of 72 DFT, and that roof is nowhere near that spec. If there is a weakness with that particular roofing system it is because it should go down 144 mil thick, which looks like way too much when you're spraying it on, and consequently it usually gets installed too thin - it is 50% water and when it cures out half the thickness is gone.

so and how this method fixes the standing water issue? with hope that the water will not penetrate ? it's a false hope.

Tell Jeff to hold his phone/camera horizontally. The vertical video orientation is probably why this video has only 81 views in 8 months while the channel has almost 2000 subscribers. Just a friendly suggestion from a veteran video professional.😀

Will this elastomer adhere to painted and antiskid fiberglass?

Putting any coatings in a heavily ponding area is not a good idea if your looking for a long-term fix. A properly Installed silicone may last for years. Anything else maybe a few years if your lucky